Chlorine leak found while investigating water line bust in Baltimore

Chlorine leak

HMN-The Baltimore Sun reports that while public works officials were investigating a busted water main, a chlorine leak was found in the area.

A chlorine pumping station near Lake Ashburton in Northwest Baltimore leaked chlorine gas early Wednesday, while a separate broken water main across Longwood Street coated a sidewalk with ice, requiring water to be shut off in the area for about 70 customers.

The city Department of Public Works initially reported that the broken water main was leaking freshly chlorinated water — and attributed the chlorine smell in the area to the water leak — before clarifying that a separate gas leak had taken place.

“As it turns out, the water main break and the gas problem seemed linked by proximity and timing but they are unrelated events,” Department of Public Works spokesman Jeffrey Raymond said.

The gas leak, caused by a broken vacuum regulator at the pumping station, was discovered about 4:45 a.m. Wednesday and contained in about an hour and 15 minutes, Raymond said. It’s unclear how much chlorine leaked or whether it went into the lake in Hanlon Park, at Liberty Heights Avenue and North Hilton Street.

A collapsed sidewalk in the 2700 block of Longwood Street, where the water main break was discovered around the same time, was cordoned off Wednesday. The cause of the water main break has not been identified, Raymond said.

Cynthia Dorsey, 56, who lives on the block, said she first noticed water from the broken main running down the street Tuesday afternoon.

“They were talking about one on the news last night, but that wasn’t in this area,” Dorsey said. “But when we went to the store, we seen the water going down the hill.”

When Dorsey noticed her water had been shut off around midnight, she said, she called her landlord, who told her the whole block’s water was out.

It’s one of nearly three dozen water main breaks in the city and Baltimore County that public works crews were responding to during a frigid first week of the year, officials said. Crews also repaired a broken main at 25th and St. Paul streets Wednesday and were working on another at North and Greenmount avenues.

The city is ordering all public works crews to work 12-hour shifts and calling in contractors to repair the slew of water main breaks.

Residents on Green Ridge Road in Catonsville were dealing with ice-covered lawns, trees, gutters, power lines and porches after a water main break doused the street with an unrelenting tower of water for hours Tuesday night. The Department of Public works stopped the leak around 10:15 p.m.

A water main break in Annapolis shut Bay Ridge Road in both directions overnight Tuesday. Annapolis police said officers were called to assist with repairs to the break in the area of Bay Ridge Road and Cypress Road Tuesday night.

Capt. Russ Davies, a spokesman for the Anne Arundel County Fire Department, said that since Monday, the department has responded to at least 10 calls of broken pipes in homes as well as 10 calls for fire alarms set off by a sprinkler system malfunctioning due to the cold.

In Harford County, Havre de Grace public works crews looking for the source of a water leak learned Wednesday that frozen equipment was to blame.

“The extremely cold temperatures caused a gauge level indicator to freeze. Subsequently, this gave us a false reading leading us to believe water pressure was low, an indicator of a water leak,” Adam Rybczynski, digitial marketing strategist for the city, said.

Sign up for the Hazmatnation mailing list!

HazSim Pro training system has been used to train across the U.S since 2011. Trainers in HazMat and Confined Space realized that ‘tapping the student on the shoulder’ was NOT effective training. This system uses NO hazardous materials and although may not look exactly like your front line meter, shows the important data which the all students needs to learn to ‘react’ to. Click HERE for video of setting up the system. Click this link for customers in action using the HazSim to better train responders. Click HERE for a quote.

 

HazSim

Leave a Reply

Your email address will not be published. Required fields are marked *

*

%d bloggers like this: